CEM GD-3805 Ammonia Gas Detector with built-in Pump
₹44,955.00 including GST @18%
Intelligent, portable Ammonia Detector 0-100ppm & 0.1ppm resolution. With built-in pump detection mode. Integrated water vapour and dust filter for use in high humidity and dust environments. Measures in both ppm and mg/m3. Rechargeable Battery, Data Logging, 2.8″ colour LCD display.
- Description
- Additional information
- Specifications
- Catalogue
- Reviews (0)
Description
The GD-3805 is an intelligent, Ammonia gas detector with large-scale integrated circuit technology and advanced standardised technology. It adopts built-in pump detection mode to achieve faster response.
Features an integrated filter to prevent damage to the sensor due to water vapour and dust entering the instrument. It can be used in high humidity and high dust environments. The shell is made of high-strength engineering plastics with high strength, with good hand feel, and is waterproof, dust proof and explosion-proof.
It can be used in places requiring continuous detection of flammable, explosive, toxic and harmful gases, such as petroleum, chemical industry, medicine, environmental protection, storage, household environment, air treatment, etc
Additional information
| Model | |
|---|---|
| Brand | |
| Warranty | |
| Colour | |
| Gas Detection Range | 0 to 100ppm |
| Resolving Power | 0.1ppm |
| Accuracy | <±3%FS |
| Measurement Units | ppm and mg/m3 |
| Response Time | <90s |
| Working Temperature | -20 to 40°C |
| Working Humidity | 15% to 95%RH |
| Working Pressure | 90 to 110kPa |
| Power Supply | Battery |
| Battery Type | Li-Ion Rechargeable |
| Battery Capacity | 3.7v, 3100mAh |
| Charging System | 5V/1A, Type-C |
| Display | |
| Display Mode | General words, Graphical Histogram |
| Linearity | Linear |
| Sensor Life | 2 years, Replaceable |
| Storage Function | >100000 data |
| Detection Mode | Adjustable time, Pump suction |
| Shell | IP65, Non metallic shell |
- Range: 0 to 100 ppm
- Resolution: 0.1ppm
- Accuracy: <±3%FS
- Response Time: <90s
- Sensor Life: 2 years, the sensor is replaceable
- Detection Mode: Pump suction, Adjustable time
- Protection: Non metallic shell; IP65 dust and splash proof
- Units: can be freely switched between ppm and mg/m3.
- Maximum and Minimum: Values recorded and displayed.
- Interface: Rich interface. Supports local viewing, deletion and data export, the storage function can be turned on or off and the storage intervals can be set arbitrarily.
- Display: 2.8 inch colour screen – displays time, concentration, alarm, storage, communication and other information.
- Data Storage: Large capacity, more than 100000.
- Alarm: Multiple alarm modes: Low alarm value and High alarm value are adjustable.
- Alarm Types: Mode can be set as audible and visual alarm, vibration alarm and audible and visual + vibration alarm.
- Two Display Modes: can be switched, the general words show the average, maximum and minimum gas concentration, the graphical real-time histogram shows the average value.
- The start and end detection time can be set arbitrarily to prolong the service time of the instrument.
- Power: 3100mAH high-capacity lithium battery.
View Catalogue: GD-3805 Ammonia Detector with built-in Pump Catalogue Web
Be the first to review “CEM GD-3805 Ammonia Gas Detector with built-in Pump”
You must be logged in to post a review.
Reviews
There are no reviews yet.