CE-0102PF 96 x 96 mm sq Single Phase Power Factor Meter
₹4,793.00 including GST @18%
Microprocessor Based, 96 x 96 mm sq, For Single Phase, Red LED Display.
Compare
- Description
- Additional information
- Specifications
- Catalogue
- Reviews (0)
Description
Microprocessor Based, 96 x 96 mm sq, For Single Phase, Red LED Display.
Additional information
| Model | |
|---|---|
| Brand | |
| Warranty | |
| Input Impedance | 0.002 ohm for current circuit, 1 Meg. ohm for voltage circuit. |
| Control Power | 230 Volt AC ± 10%, 50/60 Hz, 3VA |
| Voltage Input | 250 V Max |
| Current Input | 7A Max continuous at any current terminal |
| Frequency Range | |
| Operating Temperature Range | |
| Storage Temperature Range | |
| Relative Humidity | 95 % |
| Dielectric Strength | 2 KV for 1 minute |
| PF Range | 0.03 LAG to 0.03 LEAD |
| Accuracy | ±0.02% Of reading |
- Microprocessor based 3 phase and single phase Power Factor measurement.
- Available in 96 * 96 mm Bezel Size for three phase and single phase meters and 96 * 48mm for single phase meters.
- Meters can be factory set for different CT/PT ratios to give a direct reading.
- Three phase meters display individual phase values and also system values.
- Available for 415V(LT) and 110 V(HT) systems and for 1 Amp and 5 Amp CT secondary.
- Auxiliary Power Supply: 230V AC 50Hz / 110V AC 50Hz
- In the Model number Y could be 3 for 3 phase and 1 for single phase and X could be 2 for 2 wire loads, 3 for 3 wire loads and 4 for 4 wire loads
Be the first to review “CE-0102PF 96 x 96 mm sq Single Phase Power Factor Meter”
You must be logged in to post a review.
Reviews
There are no reviews yet.